{"title":"Modlite","description":"","products":[{"product_id":"modlite-plhv2-18650-complete-package","title":"Modlite PLHv2-18650 Light Package","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis light package contains a PLHv2-light head, 18650 body and tail cap. It also includes a single KeepPower 3500mAh 18650 battery and a XTAR MC2 charger. While lumen output with this light is similar to the Surefire® M600DF head the throw is much better suited to a rifle mounted application at more than three times the amount throw than the M600DF. This light is a large step forward from the PLHv1 light. Lumen output is about the same but throw is greatly improved. Is is the best balance of flood and throw available.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIf you're looking for the best overall output and throw this is the package you want. We also offer the same light in a shorter package with our 18350 body.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFeatures\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCool White 5700K emitter tint\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMade and assembled\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003ein the USA\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDrivers are fully potted and tested to withstand select fire SCAR 17 recoil.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLifetime guarantee\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eApproximately 1350 out the front lumens and candela is approximately 54,000. It is an excellent overall light head good for indoor or outdoor use.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e6061 Series Alum bezel with Mil-Spec Hard Anodizing.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUltra clear BOROFLOAT\u003csup data-mce-fragment=\"1\"\u003e®\u003c\/sup\u003e lens allows 98-99% light transmittance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDimensions\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLength w\/ Clicky tailcap:\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e5 3\/8\" \/ 136.5mm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHead Diameter: 1 3\/16\" \/ 30.16mm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWeight: 5.4oz (w\/ tail cap and battery)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eLithium CR123 cells are not supported\u003c\/strong\u003e and if used will cause the cells to heat up and possibly explode or catch fire. Runtime is about 75 minutes with the supplied 18650 cells. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBeam comparison shots are available in the product images above.\u003c\/p\u003e","brand":"Modlite","offers":[{"title":"Default Title","offer_id":39499121000611,"sku":"","price":309.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0457\/0431\/5043\/products\/ScreenShot2021-03-20at2.02.37PM.png?v=1616263463"},{"product_id":"modlite-plhv2-18350-light-package","title":"Modlite PLHv2-18350 Light Package","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThis light package contains a PLHv2-light head, 18350 body and tail cap. It also includes a single KeepPower 1200mAh 18350 battery and a XTAR MC2 charger. While lumen output with this light is similar to the Surefire® M600DF head the throw is much better suited to a rifle mounted application at more than three times the amount throw than the M600DF. This light is a large step forward from the PLHv1 light. Lumen output is about the same but throw is greatly improved. It is the best balance of flood and throw available.\u003c\/p\u003e\n\u003cp\u003eIf you're looking for the best overall output and throw this is the package you want.\u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCool White 5700K emitter tint\u003c\/li\u003e\n\u003cli\u003eMade and assembled\u003cspan\u003e \u003c\/span\u003ein the USA\u003c\/li\u003e\n\u003cli\u003eDrivers are fully potted and tested to withstand select fire SCAR 17 recoil.\u003c\/li\u003e\n\u003cli\u003eLifetime guarantee\u003c\/li\u003e\n\u003cli\u003eApproximately 1350 out the front lumens and candela is approximately 54,000. It is an excellent overall light head good for indoor or outdoor use.\u003c\/li\u003e\n\u003cli\u003e6061 Series Alum bezel with Mil-Spec Hard Anodizing.\u003c\/li\u003e\n\u003cli\u003eUltra clear BOROFLOAT\u003csup\u003e®\u003c\/sup\u003e lens allows 98-99% light transmittance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength w\/ Clicky tailcap:\u003cspan\u003e 4 1\/8\u003c\/span\u003e\" \/ 105mm\u003c\/li\u003e\n\u003cli\u003eHead Diameter: 1 3\/16\" \/ 30.16mm\u003c\/li\u003e\n\u003cli\u003eWeight: 4.27 oz (w\/ tail cap and battery)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLithium CR123 cells are not supported\u003c\/strong\u003e and if used will cause the cells to heat up and possibly explode or catch fire. Runtime is about 35 minutes with the supplied 18350 cells. \u003c\/p\u003e\n\u003cp\u003eBeam comparison shots are available in the product images above.\u003c\/p\u003e","brand":"Modlite","offers":[{"title":"Default Title","offer_id":39499126210723,"sku":"","price":309.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0457\/0431\/5043\/products\/ScreenShot2021-03-20at2.08.30PM.png?v=1616263788"},{"product_id":"modlite-okw-18350-light-package","title":"Modlite OKW-18350 Light Package","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis light package contains a OKW light head, 18350 body and tailcap. It also includes a single KeepPower 1200mAh 18350 battery and a XTAR MC2 charger.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhile lumen output is only 680 lumen the throw is about 400% greater than the M600DF.  This light head is best suited for situations where extreme throw is needed.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"featlist\" data-mce-fragment=\"1\"\u003e\n\u003cul class=\"accordion-content\" data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMade\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003ein the USA\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLifetime guarantee\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eApproximately 680 out the front lumens and candela\u003cspan face=\"verdana,arial,helvetica,sans-serif\" size=\"4\" data-mce-fragment=\"1\"\u003e is approximately 69,000. It is an excellent overall light head good for indoor or outdoor use\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDrivers are fully potted and tested to withstand select fire SCAR 17 recoil\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e6061 Series Alum bezel with Mil-Spec Hard Anodizing\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUltra clear \u003cspan data-mce-fragment=\"1\"\u003eBOROFLOAT\u003c\/span\u003e\u003csup data-mce-fragment=\"1\"\u003e®\u003c\/sup\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003elens allows 98-99% light transmittance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLength w\/ Clicky tailcap: 4 1\/8\" \/ 105mm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHead Diameter: 1 3\/16\" \/ 30.16mm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWeight: 4.27 oz (w\/ tail cap and battery)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eLithium CR123 cells are not supported\u003c\/strong\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eand if used will cause the cells to heat up and possibly explode or catch fire. We recommend the KeepPower 18350 high drain cells which can be found\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/modlite.com\/collections\/batteries\" title=\"KeepPower Batteries\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/modlite.com\/collections\/batteries\"\u003ehere\u003c\/a\u003e. Runtime is about 35 minutes with the supplied 18350\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003ecells. \u003c\/p\u003e\n\u003c\/div\u003e","brand":"Modlite","offers":[{"title":"Default Title","offer_id":39499131125923,"sku":"","price":309.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0457\/0431\/5043\/products\/ScreenShot2021-03-20at2.12.43PM.png?v=1616264056"},{"product_id":"copy-of-modlite-okw-18350-light-package","title":"Modlite OKW-18650 Light Package","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis light package contains a OKW light head, 18650 body and tail cap. It also includes a single KeepPower 3500mAh 18650 battery and a XTAR MC2 charger. While lumen output is only 680 lumen the throw is about 400% greater than the M600DF.  This light head is best suited for situations where extreme throw is needed.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"featlist\" data-mce-fragment=\"1\"\u003e\n\u003cul class=\"accordion-content\" data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMade\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003ein the USA\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLifetime guarantee\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eApproximately 680 out the front lumens and candela\u003cspan face=\"verdana,arial,helvetica,sans-serif\" size=\"4\" data-mce-fragment=\"1\"\u003e is approximately 69,000. It is an excellent overall light head good for indoor or outdoor use\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDrivers are fully potted and tested to withstand select fire SCAR 17 recoil\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e6061 Series Alum bezel with Mil-Spec Hard Anodizing\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUltra clear \u003cspan data-mce-fragment=\"1\"\u003eBOROFLOAT\u003c\/span\u003e\u003csup data-mce-fragment=\"1\"\u003e®\u003c\/sup\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003elens allows 98-99% light transmittance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLength w\/ Clicky tailcap: 5 3\/8\" \/ 136mm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHead Diameter: 1 3\/16\" \/ 30.16mm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWeight: 5.4oz (w\/ tail cap and battery)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eLithium CR123 cells are not supported\u003c\/strong\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eand if used will cause the cells to heat up and possibly explode or catch fire. We recommend the KeepPower 18650 high drain cells which can be found\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/modlite.com\/collections\/batteries\" title=\"KeepPower Batteries\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/modlite.com\/collections\/batteries\"\u003ehere\u003c\/a\u003e. Runtime is about 75 minutes with the supplied 18650\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003ecells.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Modlite","offers":[{"title":"Default Title","offer_id":39499140956323,"sku":"","price":309.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0457\/0431\/5043\/products\/ScreenShot2021-03-20at2.15.10PM.png?v=1616264180"},{"product_id":"modlite-fde-plhv2-18650-light-package","title":"Modlite FDE PLHv2-18650 Light Package","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis light package contains a PLHv2-light head, 18650 body and tail cap. It also includes a single KeepPower 3500mAh 18650 battery and a XTAR MC2 charger. While lumen output with this light is similar to the Surefire® M600DF head the throw is much better suited to a rifle mounted application at more than three times the amount throw than the M600DF. This light is a large step forward from the PLHv1 light. Lumen output is about the same but throw is greatly improved. Is is the best balance of flood and throw available.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIf you're looking for the best overall output and throw this is the package you want. We also offer the same light in a shorter package with our 18350 body.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e***Due to the chemical process that takes place during Type 3 Hardcoat, the finish on the product can vary from one to the next, even if it is the same batch. We strive to create as tight of a range as possible, and match parts to the best of our ability, but be aware that there may be slight variation between sections of the light.***\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFeatures\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCool White 5700K emitter tint\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMade and assembled\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003ein the USA\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDrivers are fully potted and tested to withstand select fire SCAR 17 recoil.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLifetime guarantee\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eApproximately 1350 out the front lumens and candela is approximately 54,000. It is an excellent overall light head good for indoor or outdoor use.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e6061 Series Alum bezel with Mil-Spec Hard Anodizing.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUltra clear BOROFLOAT\u003csup data-mce-fragment=\"1\"\u003e®\u003c\/sup\u003e lens allows 98-99% light transmittance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDimensions\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLength w\/ Clicky tailcap:\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e5 3\/8\" \/ 136mm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHead Diameter: 1 3\/16\" \/ 30.16mm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWeight: 5.4oz (w\/ tail cap and battery)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eLithium CR123 cells are not supported\u003c\/strong\u003e and if used will cause the cells to heat up and possibly explode or catch fire. We recommend the KeepPower 18650 high drain cells which can be found \u003ca href=\"https:\/\/modlite.com\/collections\/batteries\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/modlite.com\/collections\/batteries\"\u003ehere\u003c\/a\u003e. Runtime is about 75 minutes with the supplied 18650 cells. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBeam comparison shots are available in the product images above.\u003c\/p\u003e","brand":"Modlite","offers":[{"title":"Default Title","offer_id":39499148558499,"sku":"","price":309.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0457\/0431\/5043\/products\/ScreenShot2021-03-20at2.19.33PM.png?v=1616264414"},{"product_id":"modlite-fde-okw-18650-light-package","title":"Modlite FDE OKW-18650 Light Package","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis light package contains a OKW light head, 18650 body and tail cap. It also includes a single KeepPower 3500mAh 18650 battery and a XTAR MC2 charger. While lumen output is only 680 lumen the throw is about 400% greater than the M600DF.  This light head is best suited for situations where extreme throw is needed.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e***Due to the chemical process that takes place during Type 3 Hardcoat, the finish on the product can vary from one to the next, even if it is the same batch. We strive to create as tight of a range as possible, and match parts to the best of our ability, but be aware that there may be slight variation between sections of the light.***\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFeatures\u003c\/p\u003e\n\u003cdiv class=\"featlist\" data-mce-fragment=\"1\"\u003e\n\u003cul class=\"accordion-content\" data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMade\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003ein the USA\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLifetime guarantee\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eApproximately 680 out the front lumens and candela\u003cspan face=\"verdana,arial,helvetica,sans-serif\" size=\"4\" data-mce-fragment=\"1\"\u003e is approximately 69,000. It is an excellent overall light head good for indoor or outdoor use\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDrivers are fully potted and tested to withstand select fire SCAR 17 recoil\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e6061 Series Alum bezel with Mil-Spec Hard Anodizing\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUltra clear \u003cspan data-mce-fragment=\"1\"\u003eBOROFLOAT\u003c\/span\u003e\u003csup data-mce-fragment=\"1\"\u003e®\u003c\/sup\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003elens allows 98-99% light transmittance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDimensions\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLength w\/ Clicky tailcap: 5 3\/8\" \/ 136mm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHead Diameter: 1 3\/16\" \/ 30.16mm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWeight: 5.4oz (w\/ tail cap and battery)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eLithium CR123 cells are not supported\u003c\/strong\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eand if used will cause the cells to heat up and possibly explode or catch fire. We recommend the KeepPower 18650 high drain cells which can be found\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/modlite.com\/collections\/batteries\" title=\"KeepPower Batteries\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/modlite.com\/collections\/batteries\"\u003ehere\u003c\/a\u003e. Runtime is about 75 minutes with the supplied 18650\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003ecells. \u003c\/p\u003e\n\u003c\/div\u003e","brand":"Modlite","offers":[{"title":"Default Title","offer_id":39499153309859,"sku":"","price":309.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0457\/0431\/5043\/products\/ScreenShot2021-03-20at2.19.33PM_ec925a5e-adce-46ef-a305-408459c245ae.png?v=1616264685"},{"product_id":"modlite-fde-plhv2-18350-light-package","title":"Modlite FDE PLHv2-18350 Light Package","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis light package contains a PLHv2-light head, 18350 body and tail cap. It also includes a single KeepPower 1200mAh 18350 battery and a XTAR MC2 charger. While lumen output with this light is similar to the Surefire® M600DF head the throw is much better suited to a rifle mounted application at more than three times the amount throw than the M600DF. This light is a large step forward from the PLHv1 light. Lumen output is about the same but throw is greatly improved. It is the best balance of flood and throw available.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIf you're looking for the best overall output and throw this is the package you want.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e***Due to the chemical process that takes place during Type 3 Hardcoat, the finish on the product can vary from one to the next, even if it is the same batch. We strive to create as tight of a range as possible, and match parts to the best of our ability, but be aware that there may be slight variation between sections of the light.***\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFeatures\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCool White 5700K emitter tint\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMade and assembled\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003ein the USA\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDrivers are fully potted and tested to withstand select fire SCAR 17 recoil.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLifetime guarantee\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eApproximately 1350 out the front lumens and candela is approximately 54,000. It is an excellent overall light head good for indoor or outdoor use.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e6061 Series Alum bezel with Mil-Spec Hard Anodizing.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUltra clear BOROFLOAT\u003csup data-mce-fragment=\"1\"\u003e®\u003c\/sup\u003e lens allows 98-99% light transmittance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDimensions\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLength w\/ Clicky tailcap:\u003cspan data-mce-fragment=\"1\"\u003e 4 1\/8\u003c\/span\u003e\" \/ 105mm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHead Diameter: 1 3\/16\" \/ 30.16mm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWeight: 4.27 oz (w\/ tail cap and battery)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eLithium CR123 cells are not supported\u003c\/strong\u003e and if used will cause the cells to heat up and possibly explode or catch fire. Runtime is about 35 minutes with the supplied 18350 cells. \u003c\/p\u003e","brand":"Modlite","offers":[{"title":"Default Title","offer_id":39499161829539,"sku":"","price":309.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0457\/0431\/5043\/products\/ScreenShot2021-03-20at2.19.33PM_7a8f47e3-c1ae-4ee3-be4a-2cd3f92ebe61.png?v=1616264859"},{"product_id":"modlite-fde-okw-18350-light-package","title":"Modlite FDE OKW-18350 Light Package","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis light package contains a OKW light head, 18350 body and tailcap. It also includes a single KeepPower 1200mAh 18350 battery and a XTAR MC2 charger.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhile lumen output is only 680 lumen the throw is about 400% greater than the M600DF.  This light head is best suited for situations where extreme throw is needed.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e***Due to the chemical process that takes place during Type 3 Hardcoat, the finish on the product can vary from one to the next, even if it is the same batch. We strive to create as tight of a range as possible, and match parts to the best of our ability, but be aware that there may be slight variation between sections of the light.***\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFeatures\u003c\/p\u003e\n\u003cdiv class=\"featlist\" data-mce-fragment=\"1\"\u003e\n\u003cul class=\"accordion-content\" data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMade\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003ein the USA\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLifetime guarantee\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eApproximately 680 out the front lumens and candela\u003cspan face=\"verdana,arial,helvetica,sans-serif\" size=\"4\" data-mce-fragment=\"1\"\u003e is approximately 69,000. It is an excellent overall light head good for indoor or outdoor use\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDrivers are fully potted and tested to withstand select fire SCAR 17 recoil\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e6061 Series Alum bezel with Mil-Spec Hard Anodizing\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUltra clear \u003cspan data-mce-fragment=\"1\"\u003eBOROFLOAT\u003c\/span\u003e\u003csup data-mce-fragment=\"1\"\u003e®\u003c\/sup\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003elens allows 98-99% light transmittance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDimensions\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLength w\/ Clicky tailcap: 4 1\/8\" \/ 105mm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHead Diameter: 1 3\/16\" \/ 30.16mm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWeight: 4.27 oz (w\/ tail cap and battery)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eLithium CR123 cells are not supported\u003c\/strong\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eand if used will cause the cells to heat up and possibly explode or catch fire. Runtime is about 35 minutes with the supplied 18350\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003ecells. \u003c\/p\u003e\n\u003c\/div\u003e","brand":"Modlite","offers":[{"title":"Default Title","offer_id":39499168514211,"sku":"","price":309.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0457\/0431\/5043\/products\/ScreenShot2021-03-20at2.19.33PM_d45b9e6f-1f45-4e49-bf7e-eb8fafbbb99e.png?v=1616264986"},{"product_id":"modlite-handheld-plhv2-18650-light-package","title":"Modlite Handheld PLHv2-18650 Light Package","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis light package contains a PLHv2-light head, 18650 handheld body and tail cap. It also includes a single KeepPower 3500mAh 18650 battery and a XTAR MC2 charger. While lumen output with this light is similar to the Surefire® M600DF head, the throw is much better suited to allow PID (Positive ID) at greater distances at more than three times the amount throw than the M600DF. This light is a large step forward from the PLHv1 light. Lumen output is about the same but throw is greatly improved. It is the best balance of flood and throw available.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFeatures\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCool White 5700K emitter tint\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMade and assembled\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003ein the USA\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDrivers are fully potted and tested to withstand select fire SCAR 17 recoil.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLifetime guarantee\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eApproximately 1350 out the front lumens and candela is approximately 54,000. It is an excellent overall light head good for indoor or outdoor use.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e6061 Series Alum bezel with Mil-Spec Hard Anodizing.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUltra clear BOROFLOAT\u003csup data-mce-fragment=\"1\"\u003e®\u003c\/sup\u003e lens allows 98-99% light transmittance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDimensions\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLength w\/ Clicky tailcap:\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e5 1\/2\" \/ 140mm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHead Diameter: 1 3\/16\" \/ 30.16mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eLithium CR123 cells are not supported\u003c\/strong\u003e and if used will cause the cells to heat up and possibly explode or catch fire. Runtime is about 75 minutes with the supplied 18650 cells. \u003c\/p\u003e","brand":"Modlite","offers":[{"title":"Default Title","offer_id":39499177394339,"sku":"","price":309.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0457\/0431\/5043\/products\/ScreenShot2021-03-20at2.51.17PM.png?v=1616266333"},{"product_id":"modlite-handheld-okw-18650-light-package","title":"Modlite Handheld OKW-18650 Light Package","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis light package contains a PLHv2-light head, 18650 handheld body and tail cap. It also includes a single KeepPower 3500mAh 18650 battery and a XTAR MC2 charger. While lumen output with this light is similar to the Surefire® M600DF head, the throw is much better suited to allow PID (Positive ID) at greater distances at more than three times the amount throw than the M600DF. This light is a large step forward from the PLHv1 light. Lumen output is about the same but throw is greatly improved. It is the best balance of flood and throw available.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFeatures\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCool White 5700K emitter tint\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMade and assembled\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003ein the USA\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDrivers are fully potted and tested to withstand select fire SCAR 17 recoil.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLifetime guarantee\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eApproximately 1350 out the front lumens and candela is approximately 54,000. It is an excellent overall light head good for indoor or outdoor use.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e6061 Series Alum bezel with Mil-Spec Hard Anodizing.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUltra clear BOROFLOAT\u003csup data-mce-fragment=\"1\"\u003e®\u003c\/sup\u003e lens allows 98-99% light transmittance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDimensions\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLength w\/ Clicky tailcap:\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e5 1\/2\" \/ 140mm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHead Diameter: 1 3\/16\" \/ 30.16mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eLithium CR123 cells are not supported\u003c\/strong\u003e and if used will cause the cells to heat up and possibly explode or catch fire. Runtime is about 75 minutes with the supplied 18650 cells. \u003c\/p\u003e","brand":"Modlite","offers":[{"title":"Default Title","offer_id":39499246502051,"sku":null,"price":309.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0457\/0431\/5043\/products\/ScreenShot2021-03-20at2.56.28PM.png?v=1616266632"},{"product_id":"modlite-handheld-18650-light-body-package","title":"Modlite Handheld 18650 Light Body Package","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe Modlite handheld 18650 Handheld Body and Tailcap package is designed to fit all Modlite heads and is also a direct replacement body for Surefire® \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eScout Light M600DF weapon lights and KE2-DF heads.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis light body accepts 18650 cells only.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eLithium CR123 cells are not supported with Modlite light Heads\u003c\/strong\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eand if used will cause the cells to heat up and possibly explode or catch fire. Runtime is about 70-75 minutes with these cells. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e Dimensions:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBody Diameter: .990\" 25.14mm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHead Diameter: 1 3\/16\"\/ 30mm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLength w\/o head: 3 7\/8\"\/  98.5mm \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e*Due to the chemical process that takes place during Type III Hardcoat, the final finish can vary slightly from part to part (even parts done in the same batch).  Therefore, your light may vary from one to the next, and may vary slightly from the photos shown online.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Modlite","offers":[{"title":"Default Title","offer_id":39499251974307,"sku":"","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0457\/0431\/5043\/products\/ScreenShot2021-03-20at2.58.53PM.png?v=1616266782"},{"product_id":"modlite-handheld-plhv2-18350-light-package","title":"Modlite Handheld PLHv2-18350 Light Package","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis light package contains a PLHv2-light head, 18350 handheld body and tail cap. It also includes a single KeepPower 1200mAh 18350 battery and a XTAR MC2 charger. While lumen output with this light is similar to the Surefire® M600DF head, the throw is much better suited to allow PID (Positive ID) at greater distances at more than three times the amount throw than the M600DF. This light is a large step forward from the PLHv1 light. Lumen output is about the same but throw is greatly improved. It is the best balance of flood and throw available.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFeatures\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCool White 5700K emitter tint\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMade and assembled\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003ein the USA\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDrivers are fully potted and tested to withstand select fire SCAR 17 recoil.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLifetime guarantee\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eApproximately 1350 out the front lumens and candela is approximately 54,000. It is an excellent overall light head good for indoor or outdoor use.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e6061 Series Alum bezel with Mil-Spec Hard Anodizing.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUltra clear BOROFLOAT\u003csup data-mce-fragment=\"1\"\u003e®\u003c\/sup\u003e lens allows 98-99% light transmittance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eLithium CR123 cells are not supported\u003c\/strong\u003e and if used will cause the cells to heat up and possibly explode or catch fire. Runtime is about 35 minutes with the supplied 18350 cells. \u003c\/p\u003e","brand":"Modlite","offers":[{"title":"Default Title","offer_id":39501444743331,"sku":"","price":309.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0457\/0431\/5043\/products\/ScreenShot2021-03-20at8.51.44PM.png?v=1616287934"},{"product_id":"modlite-handheld-18350-light-body-package","title":"Modlite Handheld 18350 Light Body Package","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe Modlite handheld 18350 Handheld Body and Tailcap package is designed to fit all Modlite heads and is also a direct replacement body for Surefire® \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eScout Light M600DF weapon lights and KE2-DF heads.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis light body accepts 18350 cells only.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eLithium CR123 cells are not supported with Modlite light Heads\u003c\/strong\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eand if used will cause the cells to heat up and possibly explode or catch fire. Runtime is about 35 minutes with these cells.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis package is for a 18350 Handheld body and tailcap and not a complete light.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e*Due to the chemical process that takes place during Type III Hardcoat, the final finish can vary slightly from part to part (even parts done in the same batch).  Therefore, your light may vary from one to the next, and may vary slightly from the photos shown online.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Modlite","offers":[{"title":"Default Title","offer_id":39501450838179,"sku":"","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0457\/0431\/5043\/products\/ScreenShot2021-03-20at8.54.05PM.png?v=1616288078"},{"product_id":"modlite-handheld-okw-18350-light-package","title":"Modlite Handheld OKW-18350 Light Package","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis light package contains a OKW light head, 18350 Handheld body and tail cap. It also includes a single KeepPower 1200mAh 18350 battery and a XTAR MC2 charger. While lumen output is only 680 lumen the throw is about 400% greater than the M600DF.  This light head is best suited for situations where extreme throw is needed.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"featlist\" data-mce-fragment=\"1\"\u003e\n\u003cul class=\"accordion-content\" data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMade in the USA\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLifetime guarantee\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eApproximately 680 out the front lumens and candela\u003cspan face=\"verdana,arial,helvetica,sans-serif\" size=\"4\" data-mce-fragment=\"1\"\u003e is approximately 69,000. It is an excellent overall light head good for indoor or outdoor use\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDrivers are fully potted and tested.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e6061 Series Alum bezel with Mil-Spec Hard Anodizing\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUltra clear BOROFLOAT\u003csup data-mce-fragment=\"1\"\u003e®\u003c\/sup\u003e lens allows 98-99% light transmittance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eLithium CR123 cells are not supported\u003c\/strong\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eand if used will cause the cells to heat up and possibly explode or catch fire. Runtime is about 35 minutes with the supplied 18350\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003ecells.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Modlite","offers":[{"title":"Default Title","offer_id":39501496451235,"sku":"","price":309.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0457\/0431\/5043\/products\/ScreenShot2021-03-20at9.12.54PM.png?v=1616289237"},{"product_id":"modlite-ir-850-light-head","title":"Modlite IR-850 Light Head","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis light head can be used with our 18650 body, our smaller 18350 body or the Surefire\u003cspan data-mce-fragment=\"1\"\u003e®\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eM600DF Dual Fuel body. This is a dedicated IR illumination head that is designed to output IR light in the 850nm IR spectrum. The reflector is designed to deliver a good amount of spill and a well defined hot spot at distances up to 300 yards depending on atmospheric conditions.  \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003cspan class=\"hdr3 accordion-trigger\" data-mce-fragment=\"1\"\u003eFeatures\u003c\/span\u003e\u003c\/p\u003e\n\u003cul class=\"accordion-content\" data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHand assembled in and tested in the USA.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLifetime guarantee\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eApproximately 1100mW IR output. (for comparison the SF 952v is 160mW)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e6061 Series Alum bezel with Mil-Spec Hard Anodizing.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUltra clear \u003cspan data-mce-fragment=\"1\"\u003eBOROFLOAT\u003c\/span\u003e\u003csup data-mce-fragment=\"1\"\u003e®\u003c\/sup\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003elens allows 98-99% light transmittance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eLithium CR123 cells are not supported\u003c\/strong\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eand if used will cause the cells to heat up and possibly explode or catch fire. Runtime is about 120 minutes with 18650 and about 50 minutes with the smaller 18350 cells. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eDo not stack 18350 cells into an 18650 body this can cause the light to malfunction. Only use 18650 cells in 18650 bodies and 18350 cells in 18350 bodies.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Modlite","offers":[{"title":"Default Title","offer_id":39501507133603,"sku":"","price":250.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0457\/0431\/5043\/products\/ScreenShot2021-03-20at9.15.51PM.png?v=1616289370"},{"product_id":"modlite-ir-940-light-head","title":"Modlite IR-940 Light Head (Pre-Order Only)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e*PRE-ORDER ONLY.  WE WILL CONTACT YOU WHEN ITEM IS AVAILABLE*\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis light head can be used with our 18650 body, our smaller 18350 body or the Surefire\u003cspan data-mce-fragment=\"1\"\u003e®\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eM600DF Dual Fuel body. This is a dedicated IR illumination head that is designed to output IR light in the 940nm IR spectrum. The reflector is designed to deliver a good amount of spill and a well defined hot spot at distances up to 75 yards depending on atmospheric conditions.  This light head has a large visible signature reduction over our 850nm head and the Surefire\u003cspan data-mce-fragment=\"1\"\u003e® Vampire® Series of lights. If your looking for the most stealthy IR head currently available this is the light you want. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003cspan class=\"hdr3 accordion-trigger\" data-mce-fragment=\"1\"\u003eFeatures\u003c\/span\u003e\u003c\/p\u003e\n\u003cul class=\"accordion-content\" data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHand assembled in and tested in the USA.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLifetime guarantee\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eApproximately 500mW IR output. (for comparison the SF 952v is 160mW)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e6061 Series Alum bezel with Mil-Spec Hard Anodizing.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUltra clear \u003cspan data-mce-fragment=\"1\"\u003eBOROFLOAT\u003c\/span\u003e\u003csup data-mce-fragment=\"1\"\u003e®\u003c\/sup\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003elens allows 98-99% light transmittance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eLithium CR123 cells are not supported\u003c\/strong\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eand if used will cause the cells to heat up and possibly explode or catch fire. Runtime is about 120 minutes with 18650 and about 50 minutes with the smaller 18350 cells. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eDo not stack 18350 cells into an 18650 body this can cause the light to malfunction. Only use 18650 cells in 18650 bodies and 18350 cells in 18350 bodies.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Modlite","offers":[{"title":"Default Title","offer_id":39501513719971,"sku":"","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0457\/0431\/5043\/products\/MODLITE_Product_1024x1024-25_96987dad-b911-4bff-945c-7b44b1cdc5c7.jpg?v=1616289534"},{"product_id":"modlite-modbutton-lite-surefire®-modlite-plug","title":"Modlite ModButton Lite (Surefire®\/Modlite Plug)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv class=\"product-description-wrapper\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eModButton Lite is a smaller lighter weight cousin to the original ModButton. The switch features the same momentary only activation as the original ModButton. It also features the same high power cable and switch from ModButton but in a slightly smaller package without the integrated mount. The switch is made from injection molded plastic and fully potted to provide extra degree of protection in harsh environments and ensures a durable long lasting switch.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eModButton Lite utilizes a patented Unity Tactical design which supports power delivery needed by the next generation of high output weapon lights like Modlite. A Unity\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003ebuilt\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003eSurefire\u003cspan data-mce-fragment=\"1\"\u003e®\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003ecompatible cable lead allows ModButton Lite to be backwardly compatible with all Surefire\u003cspan data-mce-fragment=\"1\"\u003e®\u003c\/span\u003e, Arisaka and Modlite Scout bodies as well as Surefire UE and DS00 tail caps. \u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\nOne problem that exists today is older legacy switches are not able to pass the current needed to run current and future generation lights. These older switch designs do not allow Modlite light heads to run at full power. Typically these switches reduce output by 15-20%. ModButton Lite utilizes an updated plug design as well as improved electronics that allow the ModButton Lite to output at full power so all the lumens and candela can be put to good use.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe package includes the switch PIC mounting rails and mounting hardware only no tail cap is supplied. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNote on cable length options: For almost all use cases the 4.5in variant is what you want to buy. Unless you have a special setup the 4.5 in cable is going to be plenty even running a laser.  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eMade in the USA\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWeight: 1.8oz\u003cbr data-mce-fragment=\"1\"\u003eDimensions: 1.0 × 3.8 × 5.7 in\u003cbr data-mce-fragment=\"1\"\u003eMounting Side: Left or Right\u003cbr data-mce-fragment=\"1\"\u003eColor: Black or Tan\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"sharing\" class=\"social-sharing\" data-permalink=\"https:\/\/modlite.com\/products\/modlite-modbutton-lite\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e","brand":"Modlite","offers":[{"title":"4.5 in \/ Black","offer_id":39501525516451,"sku":"","price":78.0,"currency_code":"USD","in_stock":false},{"title":"4.5 in \/ FDE","offer_id":39501525549219,"sku":"","price":78.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0457\/0431\/5043\/products\/ScreenShot2021-03-20at9.22.29PM.png?v=1616289877"},{"product_id":"copy-of-modlite-modbutton-lite-surefire®-modlite-plug","title":"Modlite ModButton Lite (Laser Plug)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eModButton Lite is a smaller lighter weight cousin to the original ModButton. The switch features the same momentary only activation as the original ModButton. It also features the same high power cable and switch from ModButton but in a slightly smaller package without the integrated mount. The switch is made from injection molded plastic and fully potted to provide extra degree of protection in harsh environments ensures a durable long lasting switch. The plug is compatible with PEQ15, DBAL, BE Meyers\u003cspan class=\"ILfuVd\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"hgKElc\" data-mce-fragment=\"1\"\u003e®\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003eMAWL\u003cspan class=\"ILfuVd\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"hgKElc\" data-mce-fragment=\"1\"\u003e™\u003c\/span\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eand Wilcox\u003cspan class=\"ILfuVd\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"hgKElc\" data-mce-fragment=\"1\"\u003e®\u003c\/span\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eRAIDx\u003cspan class=\"ILfuVd\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"hgKElc\" data-mce-fragment=\"1\"\u003e™\u003c\/span\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003elasers.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe package includes the switch PIC mounting rail and mounting hardware only. \u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNote on cable length options: For almost all use cases the 4.5in variant is what you want to buy. Unless you have a special setup the 4.5 in cable is going to be plenty even running a laser.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eMade in the USA\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWeight: 1.8oz\u003cbr data-mce-fragment=\"1\"\u003eDimensions: 1.0 × 3.8 × 5.7 in\u003cbr data-mce-fragment=\"1\"\u003eMounting Side: Left or Right\u003cbr data-mce-fragment=\"1\"\u003eColor: Black and FDE\u003c\/p\u003e","brand":"Modlite","offers":[{"title":"4.5 in \/ Black","offer_id":39501537837219,"sku":"","price":78.0,"currency_code":"USD","in_stock":false},{"title":"4.5 in \/ FDE","offer_id":39501537869987,"sku":"","price":78.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0457\/0431\/5043\/products\/DSC05480-Edit-Edit.jpg?v=1616290094"},{"product_id":"arisaka-defense-offset-scout-mount-m-lok","title":"Arisaka Defense Offset Scout Mount M-Lok","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Patent Pending Arisaka Offset Scout Mount is designed specifically for lights that utilize the Scout-style mounting platform. It replaces the stock Picatinny rail adapter with a low profile mount for M-Lok handguards. The\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eOffset \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eScout\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e Mount is very low profile at less than 0.20\" thick.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen used on the side mounting surfaces of M-Lok handguards, the Offset \u003cspan data-mce-fragment=\"1\"\u003eScout\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e Mount places the light at a 45 degree angle and tucks it in closer to the rail system. Oriented upwards, the light is located at approximately the 1:30 or 10:30 clock positions. Oriented downwards, the light is located at approximately the 4:30 or 6:30 clock positions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Offset \u003cspan data-mce-fragment=\"1\"\u003eScout\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e Mount\u003c\/span\u003e also provides three lateral mounting positions for the light body, which allows the user to position the light closer or farther away from the top rail, front sights, or other accessories. Three positions are provided, spanning approximately 0.240\". When used with the Arisaka \u003ca href=\"http:\/\/arisakadefense.com\/products\/300-series-light-body\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/arisakadefense.com\/products\/300-series-light-body\" target=\"_blank\"\u003e300 Series Light Body\u003c\/a\u003e or\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/arisakadefense.com\/collections\/light-mounts\/products\/600-series-light-body\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/arisakadefense.com\/collections\/light-mounts\/products\/600-series-light-body\" target=\"_blank\"\u003e600 Series Light Body\u003c\/a\u003e, even more clearance can be gained for larger front sights.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCompatible with Modlite 183560 and 18650 bodies\/lights, Surefire M300A, M300B, M300C, M600B, M600C, M600P, M600U, M600V, M600DF, Streamlight Protac Rail Mount 1, 2 and HL-X, and Arisaka 300 and 600 Series.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eM620 series lights can also be used with the Offset Scout Mount with the addition of the Arisaka \u003ca href=\"http:\/\/arisakadefense.com\/products\/offset-m620-adapter\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/arisakadefense.com\/products\/offset-m620-adapter\" target=\"_blank\"\u003eOffset M620 Adapter\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eLength: 1.265\"\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWeight: 0.4 oz\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe mount is CNC machined from 6061\u003cspan data-mce-fragment=\"1\"\u003e-T6\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003ealuminum and \u003cspan data-mce-fragment=\"1\"\u003eMIL-A-8625 Type III\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e hard coat anodized. Includes necessary screws to attach light body to mount. Requires a 5\/64\" and 1\/8\" Allen wrench for installation (not included). Made in the USA.\u003c\/span\u003e\u003c\/p\u003e","brand":"Modlite","offers":[{"title":"Black","offer_id":39501590757539,"sku":"","price":53.0,"currency_code":"USD","in_stock":true},{"title":"Tan","offer_id":39501590790307,"sku":"","price":53.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0457\/0431\/5043\/products\/Arisaka_Scout_Mount_and_Pic_Mount_7_of_9.jpg?v=1616291001"},{"product_id":"arisaka-defense-inline-scout-mount-m-lok","title":"Arisaka Defense Inline Scout Mount M-Lok","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe Patented Arisaka Inline Scout\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eMount is designed specifically for lights that utilize the Scout-style mounting platform.\u003c\/span\u003e It replaces the stock Picatinny rail adapter with a low profile mount for M-Lok handguards. The mount is especially useful on handguards that feature 45 degree angle mounting flats, such as the BCM MCMR, Geissele Automatics SMR MK4, MK8 and MK16, Daniel Defense MFR, KAC URX4,\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eALG Defense EMR, MI Gen 3, \u003c\/span\u003eMega MML and Mega\/Hodge Wedge Lock.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen used on a 45 degree angle mounting flat, the Inline Scout\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eMount allows the user to position the light closer or farther away from the top 12 o'clock rail to give clearance for front sights or other accessories. Three positions are provided, allowing an offset of 0.12\" to either side of center.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe base of the Surefire Scout Light sits only 0.2\" above the mounting surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eInstallation tip: In order to reduce the overall length of the mount as much as possible, it is necessary to unscrew the tail cap of the light to access the front-most mounting screw.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThis mount is not intended for use in a cantilever fashion where it hangs off the end of the handguard. Doing so may result in mount failure in the event of a heavy impact to the light.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCompatibility with front sights varies depending on mounting location on handguards with 45 degree flats:\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e1. Top left 45 degree flat: Most sights work, including MBUS Pro, Knight's Armament Micro, Troy folding, and Diamondhead. MBUS Gen II work if positioned to allow clearance for the release tab.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2. Top right 45 degree flat: Due to the asymmetrical body of the Surefire Scout Light, placement of the front sight and light are more critical in this setup. The smaller sights like MBUS Pro and Knight's Armament Micro work fine, but the Troy, Diamondhead, and MBUS Gen II will not be able to clear the main body where the screw holes reside for the stock picatinny adapter. This means one or the other will have to be moved forward\/back to get appropriate clearance. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCompatible with the Modlite 183560 and 18650 bodies\/lights, Surefire M300A, M300B, M300C, M600B, M600C, M600P, M600U, M600V, M600DF, Streamlight Protac Rail Mount 1, 2 and HL-X, and Arisaka 300 and 600 Series. \u003cstrong data-mce-fragment=\"1\"\u003eThe Streamlight Protac Rail Mount HL-X requires a shortened 1\/8\" Allen wrench to tighten the front mounting screw. You can modify your own tool or add one to your inline scout mount above\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eLength: 3.0\"\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eHeight: 0.20\" (at Surefire Scout Light mounting point)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWeight: 0.6 oz\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe mount is CNC machined from 7075\u003cspan data-mce-fragment=\"1\"\u003e-T6\u003c\/span\u003e aluminum and \u003cspan data-mce-fragment=\"1\"\u003eMIL-A-8625 Type III\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e hard coat anodized. Includes necessary screws to attach light body to mount. Requires a 1\/8\" and 5\/64\" Allen wrench for installation (not included). \u003c\/span\u003e\u003c\/p\u003e","brand":"Modlite","offers":[{"title":"Black","offer_id":39501591380131,"sku":null,"price":39.0,"currency_code":"USD","in_stock":true},{"title":"Tan","offer_id":39501591412899,"sku":null,"price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0457\/0431\/5043\/products\/Arisaka_New_Inline-Back_6b11992c-53c1-4722-aa93-b717807dfbc4.jpg?v=1616291113"},{"product_id":"arisaka-defense-offset-scout-mount-picatinny","title":"Arisaka Defense Offset Scout Mount Picatinny","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Arisaka Offset Scout Mount is designed specifically for lights that utilize the Scout-style mounting platform. It replaces the stock Picatinny rail adapter with a low profile mount which tucks the light in much closer to the handguard.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen used on the side mounting surfaces of Picatinny handguards, the Offset \u003cspan data-mce-fragment=\"1\"\u003eScout\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e Mount places the light at a 45 degree angle and tucks it in closer to the rail system. Oriented upwards, the light is located at approximately the 1:30 or 10:30 clock positions. Oriented downwards, the light is located at approximately the 4:30 or 6:30 clock positions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCompatible with the Modlite 183560 and 18650 bodies\/lights, Surefire M300A, M300B, M300C, M300V, M312, M322, M312V, M313V, M322V, M600B, M600C, M600P, M600U, M600V, M600DF, M612, M622, M603V, M612V, M622V, Streamlight Protac Rail Mount 1, 2 and HL-X, and Arisaka 300 and 600 Series.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eLength: 1.30\"\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWeight: 0.7 oz\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe mount is CNC machined from 6061\u003cspan data-mce-fragment=\"1\"\u003e-T6\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003ealuminum and \u003cspan data-mce-fragment=\"1\"\u003eMIL-A-8625 Type III\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e hard coat anodized. Includes necessary screws to attach light body to mount. Requires an IP27\/T27 and IP20\/T20 Torx driver for installation (not included). Recommended torque: \u003cstrong data-mce-fragment=\"1\"\u003e30 inch lbs\u003c\/strong\u003e for clamping screw and \u003cstrong data-mce-fragment=\"1\"\u003e20 inch lbs\u003c\/strong\u003e for light body screws with Loctite 222 or 243. Made in the USA.\u003c\/span\u003e\u003c\/p\u003e","brand":"Modlite","offers":[{"title":"Black","offer_id":39501605208227,"sku":null,"price":53.0,"currency_code":"USD","in_stock":false},{"title":"Tan","offer_id":39501605240995,"sku":null,"price":53.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0457\/0431\/5043\/products\/osm-p-1.jpg?v=1616291219"},{"product_id":"copy-of-arisaka-defense-offset-scout-mount-picatinny","title":"Arisaka Defense Side Scout Mount M-LOK","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Arisaka Side Scout Mount (SSM) is designed specifically for lights that utilize the Scout-style mounting platform. It replaces the stock Picatinny rail adapter with a low profile mount for M-Lok handguards, and tucks the light underneath either side of the ATPIAL laser\/illuminator series, including the ATPIAL-C, AN\/PEQ15, and LA-5\/PEQ. It will also allow the light to clear the QD lever on the Steiner DBAL I2, A3, and D2.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe SSM is compatible with the Modlite 183560 and 18650 bodies\/lights, Surefire M300A, M300B, M300C, M600B, M600C, M600P, M600U, M600V, M600DF, Streamlight Protac Rail Mount 1, 2 and HL-X, Modlite 18350 and 18650 and Arisaka 300 and 600 Series.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAs a bonus, the Side Scout Mount also works nicely on the Sig MPX PCC and MCX Virtus M-Lok handguards.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eLength: 1.265\"\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThickness: 0.2\"\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWeight: 0.6 oz\u003c\/p\u003e","brand":"Modlite","offers":[{"title":"Black","offer_id":39501618249891,"sku":null,"price":40.0,"currency_code":"USD","in_stock":false},{"title":"Tan","offer_id":39501618282659,"sku":null,"price":40.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0457\/0431\/5043\/products\/ArisakaSSM.jpg?v=1616291367"},{"product_id":"arisaka-defense-inline-scout-mount-picatinny","title":"Arisaka Defense Inline Scout Mount Picatinny","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Patent Pending Arisaka Inline Scout Mount (ISM) is designed for use specifically for lights that utilize the Scout-style mounting platform. It replaces the stock Picatinny rail adapter with a low profile mount that tucks the light underneath either side of the B.E. Meyers MAWL laser\/illuminator series. Three positions on the mount allow for different diameter light heads to clear the MAWL without interference.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCompatible with the Modlite 183560 and 18650 bodies\/lights, Surefire M300A, M300B, M300C, M300V, M312, M322, M312V, M313V, M322V, M600B, M600C, M600P, M600U, M600V, M600DF, M612, M622, M603V, M612V, M622V, Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser), CD REIN, and Arisaka 300 and 600 Series.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eLength: 1.265\"\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThickness: 0.2\"\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWeight: 0.6 oz\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe mount is CNC machined from 6061\u003cspan data-mce-fragment=\"1\"\u003e-T6\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003ealuminum and \u003cspan data-mce-fragment=\"1\"\u003eMIL-A-8625 Type III\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e hard coat anodized. Includes necessary screws to attach light body to mount. Requires an IP27\/T27 and IP20\/T20 Torx driver for installation (not included). A T9 Torx driver is required to remove the stock Picatinny mount from Surefire Scout Lights. Recommended torque: \u003cstrong data-mce-fragment=\"1\"\u003e20 inch lbs\u003c\/strong\u003e for light body and \u003cstrong data-mce-fragment=\"1\"\u003e30 inch lbs \u003c\/strong\u003efor clamping screw with low\/medium strength threadlocker (Loctite 222 or 243). Made in the USA.\u003c\/span\u003e\u003c\/p\u003e","brand":"Modlite","offers":[{"title":"Black","offer_id":39501621887139,"sku":null,"price":48.0,"currency_code":"USD","in_stock":true},{"title":"Tan","offer_id":39501621919907,"sku":null,"price":48.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0457\/0431\/5043\/products\/ism-p-1__90467.1604601834.png?v=1616291508"},{"product_id":"arisaka-defense-side-scout-mount-keymod","title":"Arisaka Defense Side Scout Mount KeyMod","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePlease note: the current product pictures show the M-Lok version, but the KeyMod is identical besides using BCM KeyMod screws.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Arisaka Side Scout Mount (SSM) is designed specifically for lights that utilize the Scout-style mounting platform. It replaces the stock Picatinny rail adapter with a low-profile mount for KeyMod handguards, and tucks the light underneath either side of the ATPIAL laser\/illuminator series, including the ATPIAL-C, AN\/PEQ15, and LA-5\/PEQ. It will also allow the light to clear the QD lever on the Steiner DBAL I2, A3, and D2.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe SSM is compatible with the Modlite 183560 and 18650 bodies\/lights, Surefire M300A, M300B, M300C, M600B, M600C, M600P, M600U, M600V, M600DF, Streamlight Protac Rail Mount 1, 2 and HL-X, and Arisaka 300 and 600 Series.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAs a bonus, the Side Scout Mount also works nicely on the Sig MPX and MCX KeyMod handguards.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eLength: 1.265\"\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThickness: 0.2\"\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWeight: 0.6 oz\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe mount is CNC machined from 6061\u003cspan data-mce-fragment=\"1\"\u003e-T6\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003ealuminum and \u003cspan data-mce-fragment=\"1\"\u003eMIL-A-8625 Type III\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e hard coat anodized. Includes necessary screws to attach light body to mount. Requires a T15 and IP20\/T20 Torx driver for installation (not included). A T9 Torx driver is required to remove the stock Picatinny mount from Surefire Scout Lights. Recommended torque: \u003cstrong data-mce-fragment=\"1\"\u003e20 inch lbs\u003c\/strong\u003e for KeyMod and light body screws with medium strength threadlocker.\u003c\/span\u003e\u003c\/p\u003e","brand":"Modlite","offers":[{"title":"Black","offer_id":39501634011299,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true},{"title":"Tan","offer_id":39501634044067,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0457\/0431\/5043\/products\/ArisakaSSM_985bd418-636c-40ca-aaac-d794070042d4.jpg?v=1616291758"},{"product_id":"arisaka-defense-offset-scout-mount-keymod","title":"Arisaka Defense Offset Scout Mount KeyMod","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePlease note: the current product pictures show the M-Lok version, but the KeyMod is identical besides using BCM KeyMod screws.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Arisaka Side Scout Mount (SSM) is designed specifically for lights that utilize the Scout-style mounting platform. It replaces the stock Picatinny rail adapter with a low-profile mount for KeyMod handguards, and tucks the light underneath either side of the ATPIAL laser\/illuminator series, including the ATPIAL-C, AN\/PEQ15, and LA-5\/PEQ. It will also allow the light to clear the QD lever on the Steiner DBAL I2, A3, and D2.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe SSM is compatible with the Modlite 183560 and 18650 bodies\/lights, Surefire M300A, M300B, M300C, M600B, M600C, M600P, M600U, M600V, M600DF, Streamlight Protac Rail Mount 1, 2 and HL-X, and Arisaka 300 and 600 Series.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAs a bonus, the Side Scout Mount also works nicely on the Sig MPX and MCX KeyMod handguards.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eLength: 1.265\"\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThickness: 0.2\"\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWeight: 0.6 oz\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe mount is CNC machined from 6061\u003cspan data-mce-fragment=\"1\"\u003e-T6\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003ealuminum and \u003cspan data-mce-fragment=\"1\"\u003eMIL-A-8625 Type III\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e hard coat anodized. Includes necessary screws to attach light body to mount. Requires a T15 and IP20\/T20 Torx driver for installation (not included). A T9 Torx driver is required to remove the stock Picatinny mount from Surefire Scout Lights. Recommended torque: \u003cstrong data-mce-fragment=\"1\"\u003e20 inch lbs\u003c\/strong\u003e for KeyMod and light body screws with medium strength threadlocker.\u003c\/span\u003e\u003c\/p\u003e","brand":"Modlite","offers":[{"title":"Black","offer_id":39501638959267,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true},{"title":"Tan","offer_id":39501638992035,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0457\/0431\/5043\/products\/Arisaka_Scout_Mount_and_Pic_Mount_8_of_9.jpg?v=1616291885"},{"product_id":"arisaka-defense-side-scout-mount-picatinny","title":"Arisaka Defense Side Scout Mount Picatinny","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Arisaka Side Scout Mount (SSM) is designed specifically for lights that utilize the Scout-style mounting platform. It replaces the stock Picatinny rail adapter with a low profile mount that tucks the light underneath either side of the ATPIAL laser\/illuminator series, including the ATPIAL-C, AN\/PEQ15, and LA-5\/PEQ. It will also allow the light to clear the QD lever on the Steiner DBAL I2, A3, and D2.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe SSM is compatible with the Modlite 183560 and 18650 bodies\/lights, Surefire M300A, M300B, M300C, M600B, M600C, M600P, M600U, M600V, M600DF, Streamlight Protac Rail Mount 1, 2 and HL-X, and Arisaka 300 and 600 Series.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eLength: 1.265\"\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThickness: 0.2\"\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWeight: 0.6 oz\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe mount is CNC machined from 6061\u003cspan data-mce-fragment=\"1\"\u003e-T6\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003ealuminum and \u003cspan data-mce-fragment=\"1\"\u003eMIL-A-8625 Type III\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e hard coat anodized. Includes necessary screws to attach light body to mount. Requires a 1\/8\" Allen wrench and IP20\/T20 Torx driver for installation (not included). A T9 Torx driver is required to remove the stock Picatinny mount from Surefire Scout Lights. Recommended torque: \u003cstrong data-mce-fragment=\"1\"\u003e15-20 inch lbs\u003c\/strong\u003e for light body and clamping screws with medium strength threadlocker (Loctite 242\/243 or Vibratite VC3). Made in the USA.\u003c\/span\u003e\u003c\/p\u003e","brand":"Modlite","offers":[{"title":"Black","offer_id":39501645971619,"sku":null,"price":50.0,"currency_code":"USD","in_stock":true},{"title":"Tan","offer_id":39501646004387,"sku":null,"price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0457\/0431\/5043\/products\/Arisaka-1-4.jpg?v=1616291984"},{"product_id":"copy-of-arisaka-defense-side-scout-mount-picatinny","title":"Arisaka Defense Side Scout Mount MCX M-Lok","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Patent Pending Arisaka Side Scout Mount MCX is designed specifically for the Surefire Scout Light M600 and M300 series weapon lights, the Modlite PLH and OKW weapon lights, the Arisaka 300 and 600 Series Lights, the Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser), and Olight Odin. It replaces the stock Picatinny rail adapter with a low profile mount that tucks the light underneath either side of NGAL, ATPIAL-C, AN\/PEQ15, and LA-5\/PEQ laser\/illuminators. It will also allow the light to clear the QD lever on the Steiner DBAL I2, A3, and D2.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDesigned primarily for the SIG MCX and MPX, the Side Scout Mount MCX will also work well on the B\u0026amp;T GHM and APC series, CZ Scorpion and Bren, IWI Tavor, and AR15 M-Lok handguards even without a laser.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCompatible with the Modlite PLH, PLHv2 and OKW, Surefire M300A, M300B, M300C, M300V, M312, M322, M312V, M313V, M322V, M600B, M600C, M600P, M600U, M600V, M600DF, M612, M622, M603V, M612V, M622V, Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser), Olight Odin, CD REIN, and Arisaka 300 and 600 Series.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eLength: 1.265\"\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWeight: 0.4 oz\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe mount is CNC machined from 6061\u003cspan data-mce-fragment=\"1\"\u003e-T6\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003ealuminum and \u003cspan data-mce-fragment=\"1\"\u003eMIL-A-8625 Type III\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e hard coat anodized. Includes necessary screws to attach light body to mount. Requires an IP20\/T20 Torx driver for installation (not included). Recommended torque: \u003cstrong data-mce-fragment=\"1\"\u003e30 inch lbs\u003c\/strong\u003e for M-Lok screws and \u003cstrong data-mce-fragment=\"1\"\u003e20 inch lbs\u003c\/strong\u003e for light body screws with Loctite 222 or 243. Made in the USA.\u003c\/span\u003e\u003c\/p\u003e","brand":"Modlite","offers":[{"title":"Black","offer_id":39501651116195,"sku":"","price":48.0,"currency_code":"USD","in_stock":true},{"title":"Tan","offer_id":39501651148963,"sku":"","price":48.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0457\/0431\/5043\/products\/SSMMCX_900x_64f7abe2-b2fb-4240-b451-d8726b792f04.jpg?v=1616292150"},{"product_id":"arisaka-defense-offset-scout-mount-mcx-m-lok","title":"Arisaka Defense Offset Scout Mount MCX M-Lok","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe Patent Pending Arisaka Offset Scout Mount is designed specifically for lights that utilize the Scout-style mounting platform.. It replaces the stock Picatinny rail adapter with a low profile mount for the SIG MCX Virtus M-Lok handguards.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003ePlease note: this mount is designed specifically for the standard MCX VIRTUS handguard which has a tall profile with flat sides. \u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen used on the side mounting surfaces of M-Lok handguards, the Offset \u003cspan data-mce-fragment=\"1\"\u003eScout\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e Mount places the light at a 45 degree angle and tucks it in closer to the rail system. Oriented upwards, the light is located at approximately the 1:30 or 10:30 clock positions. Oriented downwards, the light is located at approximately the 4:30 or 6:30 clock positions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Offset \u003cspan data-mce-fragment=\"1\"\u003eScout\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e Mount\u003c\/span\u003e also provides three lateral mounting positions for the light body, which allows the user to position the light closer or farther away from the top rail, front sights, or other accessories. Three positions are provided, spanning approximately 0.240\". \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Offset\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eScout\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e Mount MCX orients the light at a 45 degree angle and tucks it in closer to the top rail at the 1:30 or 10:30 clock positions. It also\u003c\/span\u003e provides three lateral mounting positions for the light body, which allows the user to position the light closer or farther away from the top rail, front sights, or other accessories. Three positions are provided, spanning approximately 0.240\".\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCompatible with the Modlite 183560 and 18650 bodies\/lights, Surefire M300A, M300B, M300C, M300V, M312, M322, M312V, M313V, M322V, M600B, M600C, M600P, M600U, M600V, M600DF, M612, M622, M603V, M612V, M622V, Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser), Olight Odin, CD REIN, and Arisaka 300 and 600 Series.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eLength: 1.265\"\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWeight: 0.6 oz\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe mount is CNC machined from 6061-T6 aluminum and MIL-A-8625 Type III hard coat anodized. Includes necessary screws to attach light body to mount. Requires an IP20\/T20 Torx driver for installation (not included). Recommended torque: \u003cstrong data-mce-fragment=\"1\"\u003e30 inch lbs\u003c\/strong\u003e for M-Lok screws and \u003cstrong data-mce-fragment=\"1\"\u003e20 inch lbs\u003c\/strong\u003e for light body screws with Loctite 222 or 243. Made in the USA. Made in the USA.\u003c\/span\u003e\u003c\/p\u003e","brand":"Modlite","offers":[{"title":"Black","offer_id":39501688373411,"sku":"","price":48.0,"currency_code":"USD","in_stock":true},{"title":"Tan","offer_id":39501688406179,"sku":"","price":48.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0457\/0431\/5043\/products\/mcx_600x_0f1e1409-3a3d-429b-87a5-f1403368d11b.jpg?v=1616293000"},{"product_id":"arisaka-defense-inline-scout-mount-keymod-1","title":"Arisaka Defense Inline Scout Mount KeyMod","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Patented Arisaka Inline Scout\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eMount is designed specifically for lights that utilize the Scout-style mounting platform. The mount is especially useful on handguards that feature 45 degree angle mounting flats, such as the Bravo Company KMR, Daniel Defense MFR, Knight's Armament URX 4, MI Gen 3 and Mega MKM. This new version is made of 7075 aluminum for superior strength and uses\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eBCM's patented inverted KeyMod screws with twin recoil lugs for easier installation and a solid connection to your handguard.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen used on a 45 degree angle mounting flat, the Inline Scout\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eMount allows the user to position the light closer or farther away from the top 12 o'clock rail to give clearance for front sights or other accessories. Three positions are provided, allowing an offset of 0.12\" to either side of center.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe base of the Surefire Scout Light sits only 0.2\" above the mounting surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eInstallation tip: In order to reduce the overall length of the mount as much as possible, it is necessary to unscrew the tail cap of the light to access the front-most mounting screw.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThis mount is not intended for use in a cantilever fashion where it hangs off the end of the handguard. Doing so may result in mount failure in the event of a heavy impact to the light.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCompatibility with front sights varies depending on mounting location on handguards with 45 degree flats:\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e1. Top left 45 degree flat: Most sights work, including MBUS Pro, Knight's Armament Micro, Troy folding, and Diamondhead. MBUS Gen II work if positioned to allow clearance for the release tab.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2. Top right 45 degree flat: Due to the asymmetrical body of the Surefire Scout Light, placement of the front sight and light are more critical in this setup. The smaller sights like MBUS Pro and Knight's Armament Micro work fine, but the Troy, Diamondhead, and MBUS Gen II will not be able to clear the main body where the screw holes reside for the stock picatinny adapter. This means one or the other will have to be moved forward\/back to get appropriate clearance.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eLength: 3.0\"\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHeight: 0.20\" (at Surefire Scout Light mounting point)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWeight: 0.5 oz\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCompatible with Modlite 183560 and 18650 bodies, Surefire M300A, M300B, M300C, M600B, M600C, M600P, M600U, M600V, M600DF, Streamlight Protac Rail Mount 1 and 2, and Arisaka 300 and 600 Series. \u003cstrong data-mce-fragment=\"1\"\u003eThe Streamlight Protac Rail Mount HL-X is not compatible because the body is longer and covers one mounting screw\u003c\/strong\u003e. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe mount is CNC machined from 7075\u003cspan data-mce-fragment=\"1\"\u003e-T6\u003c\/span\u003e aluminum and \u003cspan data-mce-fragment=\"1\"\u003eMIL-A-8625 Type III\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e hard coat anodized. Includes necessary screws to attach light body to mount. Requires a T15 Torx and 5\/64\" Allen wrench for installation (not included). BCM KeyMod screws are covered under US Patent 9377274. Made in the USA.\u003c\/span\u003e\u003c\/p\u003e","brand":"Modlite","offers":[{"title":"Black","offer_id":39501698007203,"sku":null,"price":39.0,"currency_code":"USD","in_stock":true},{"title":"Tan","offer_id":39501698039971,"sku":null,"price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0457\/0431\/5043\/products\/Arisaka_New_Inline-Front-Edit.jpg?v=1616293076"},{"product_id":"surefire-ue-rear-tailcap","title":"SureFire UE Rear Tailcap","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe SureFire UE Rear Tailcap is a waterproof switch assembly for SureFire and Modlite Weaponlights. The UE switch receptacle accepts the Modbutton, Modbutton Lite, Hot Button, ST07, SR07 and SR07-D-IT remote tape switches (sold separately).\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVersatile, adaptable switch assembly for Modlite and Surefire WeaponLights\u003c\/li\u003e\n\u003cli\u003eSwitch receptacle accepts a variety of remote tape switches\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Advanced Night Vision","offers":[{"title":"Black","offer_id":39566731968675,"sku":"","price":56.0,"currency_code":"USD","in_stock":true},{"title":"Tan","offer_id":39566732001443,"sku":"","price":56.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0457\/0431\/5043\/products\/SFUE-BK_1_HR.jpg?v=1616982378"}],"url":"https:\/\/www.advancednightvision.com\/collections\/modlite\/illumination-devices.oembed?page=3","provider":"Advanced Night Vision","version":"1.0","type":"link"}